Big boy gpr 250 manual

0 views
  • This topic is empty.
Melihat 0 pertalian (thread) balasan
  • Penulis
    Tulisan-tulisan
    • #8187 Balas
      Gambar GravatarKivinen
      Tamu

      Big boy gpr 250 manual
      .
      .
      Download / Read Online Big boy gpr 250 manual
      .
      .
      .

      .
      Neglect, whether mechanical or cosmetic, will result in the shortening of the lifespan of your machine. Apart from the standard SAM service intervals as indicated in your service book, there are regular procedures which SAM recommend should be followed that will help you maintain the upkeep of your motorcycle or ATV. The better the engine is run it, the better it will perform and last over an extended period. Unleaded Fuel whether at the coast or inland. Engine oil will be changed at the designated service intervals by the dealer, but if your bike is out of warranty you might want to do an oil change yourself. Oil capacity varies from bike to bike and is stipulated in your user manual or on the side of the engine near the filler cap. Run the bike for a while before draining the oil from the drain plug. Make sure to replace the drain plug securely before refilling the oil. Check your User Manual to see where the drain plug is located. SAM strongly recommends the use of good quality lubricants to assist motors to operate efficiently at higher temperatures. If low grade or incorrect API oil is used, you will experience loss of oil due to evaporation. One of the most commonly neglected points, incorrect tyre pressure can lead to many problems. Higher pressures can lead to excessive tyre wear, a hard ride and lack of traction while low pressure will lead to higher fuel consumption, a sluggish feel, increased tyre wear, punctures and bad handling. SAM recommend checking tyre pressures every time you fill your tank and if you ride seldom, check the pressures before every ride. Includes TSR and any bike fitted with an on road tire application. Pay attention to tyre wear and replace tyres when the tread level gets low. Also watch out for foreign objects such as nails and thorns lodged in the tyres which should be removed and the tube repaired or replaced immediately. SAM Spares and Accessories stock a full range of highly affordable replacement tyres and tubes which are available through the dealer network. If you own a SAM product that has a visible chain drive, making sure that the chain is lubricated and at the right tension is critical. A neglected chain could result in premature chain and sprocket wear, rust, chains breaking or coming off the sprocket. Make sure your chain is lubricated on a regular basis with a good motorcycle chain lubricant but do not over lubricate and get lubricant on the tyres or disc brake pads. Adjust the chain tension as per the user manual and do not over tighten the chain as this can lead to permanent chain, sprocket or hub damage. Also pay attention to sprocket wear as a loose or worn chain can damage sprockets. If the sprockets are worn and need to be replaced, replace the chain too. Running an old chain with new sprockets will cause the sprockets to wear excessively. Pit Bike range that are used off road or in dusty conditions. The performance of your engine depends on clean, unrestricted air flow. The more off road riding you do, the more your air filter will need to be cleaned. Check your drum or disc brakes often and make sure they are working properly. Poor drum braking might just require having to adjust a cable while decreased performance of disc brakes could be from excessively worn brake pads, air in the brake line or a leaking brake line and loss of oil. If you hear a grinding metal sound when the brakes are applied, chances are your brake pads are depleted, bacically you have metal pushing against metal. If this has happened, do not ride the bike as this will damage the discs and require not only the disc pads to be replaced, but the disc rotors too. See a dealer asap to have this seen to. For the safety of yourself and others, do not ride with under performing brakes under any circumstances. Batteries need to be used regularly to remain charged. If you have not ridden for a while and the battery does not turn the engine over enough to have the engine start, try kick starting the bike. Taking it for a ride to recharge the battery is not enough, you will need to perform a deep cycle battery charge. Loose spokes can cause a swaying sensation on the bike and can even lead to the collapse of a wheel if thet get exessively loose. If you are riding off road, you need to check your spoke tension as often as you check your chain tension. Do NOT over tighten the spoke, it will pull the wheel out of alignment. When washing an on or off road SAM product, do not blast sensitive areas with a high pressure cleaner. Prepsol, Powasol, Clean Green etc, washed clean and then dried off with a chamois. Plastic enhancing products like silicone spray or automotive polish can be used on plastic body parts like scooter panels etc, but the most important thing is to spray areas that are prone to rust with a product like Q20 or WD40 which will prevent rust from occuring. Always lubricate the chain with a good motorcycle chain lube after washing. Other areas that benefit from lubrication are the k filexlib.
      .
      Big boy gpr 250 prirucnik
      Big boy gpr 250 lamhleabhar
      Big boy gpr 250 handbok
      Big boy gpr 250 service guide
      Big boy gpr 250 instruction

Melihat 0 pertalian (thread) balasan
Balasan Untuk: Big boy gpr 250 manual
Informasi Anda: